Exceptional Adhesion and Stain Blocking For Interior/Exterior Applications
A quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces.
Products |
||
| pds | ||
| msds | ||
| label | ||
Product Specifications |
||
| Solids by Weight ± 2% | 46.9% |
|
| Solids by Volume ± 2% | 33.4% |
|
| Viscosity at 70° F | 95-100 Kreb Units |
|
| Specular Gloss: | 10-20° ± 3 @60° |
|
| Flash Point: | Non-combustible |
|
| Weight Per Gallon ±0.5 lbs. | 10.5 lbs/gal |
|
| Shelf Life | 36 Months Min. |
|
(Original Sealed Container) |
||
| Calculated VOC: | 98 Grams/liter |
|
| Coverage: | ||
| Smooth Surfaces: | 400-500 ft2/gal |
|
| Porous Surfaces: | 100-300 ft2/gal |
|
Drying Times (@ 70-77° F, 50% R.H) |
||
| To Touch: | 30 Min |
|
| To Recoat: | 1Hours |
|
| Minimum Application Temp: | 50° F |
|
| Package Sizes | ||
| 5 Gallon | ||
| Part Numbers | ||
| 5 Gallon | 5450 |
|
Power Block is a quick drying, high performance 100% acrylic latex coating specifically designed to prime stained or water damaged surfaces prior to painting.
This stain blocking primer provides exceptional adhesion and stain blocking properties and may be used on interior or exterior surfaces to prevent most bleeding type stains, seal porous surfaces and provide adhesion to hard and glossy surfaces.
Powerblock is environmentally friendly, free of lead, mercury, and formaldehyde and complies with all federal and state VOC requirements.
Recommended Uses: Wallboard, Plaster, Sheetrock, Masonry, Wood, Concrete, Aluminum, Galvanized Metal, Plastic Laminates, and Vinyl Wallcoverings.
Recommended Uses: Wallboard, Plaster, Sheetrock, Masonry, Wood, Concrete, Aluminum, Galvanized Metal, Plastic Laminates, and Vinyl Wallcoverings.
Content for id "base-graybox" Goes Here