Lead Abatement Products

Lead Abatement - Encapsulants

Lead / Encapsulants

LBC Lead Barrier Compound:
• Approved in All 50 States for permanent abatement
• Tintable
• Applies Like High Quality Paint
• Use for Lockdown/Removal

ChildGuard:
• Approved in All 50 States for permanent abatement
• Tintable
• Applies Like High Quality Paint
• Use for Lockdown/Removal

Lag Kote:
• Bridging Encapsulant for a variety of ACM
• For Interior/Exterior Use
• Encase Fireproofing, Asbestos Containing Plasters & Paints
• Tested under EPA Contract #68-03-2552-T2005

Lag Kote II:
• Bridging Encapsulant for a variety of ACM
• For Interior use
• Encase pipe lagging, boilers and breeching
• Provide smooth washable finish

IAQ 1000 Hydrogen Peroxide Based Cleaner
• Whitens and Removes Stains Without use of Bleach
• Foaming Action Assists in Cleaning and Removing Mold
• Convenient Ready To Use Formula
• Exceptional Cleaning Ability

A Permanent Lead Abatement
Solution That Doesn't Require Removal

Fiberlock lead-based paint encapsulants offer a safe and effective way to permanently abate a lead paint hazard without the costs and risks associated with mechanical removal.

Fiberlock Lead Barrier Compound and ChildGuard are the most cost effective means of protecting an environment from lead paint hazards.

Applied like a high quality paint, LBC and Childguard require only one application to reach the proper thickness when using most major brands of airless spray equipment. Both products can also be applied by brush or roller and can be used for application with surface temperatures as low as 50 °F.

	LBC	Childguard
	More Information	More Information
	PDS	PDS
	MSDS	MSDS
	Label	Label

ASTM E-1795 RESULTS FOR LBC TYPE III
Requirement	ASTM Test	Result
Adhesion	D 3359	5A
Chalking	D 4214	8
Density or weight per gallon	D 1475	11.5 lbs./gal.
Dry abrasion resistance	D 4060	7.9%
Dry-film thickness	D 1005, D 1186	7 mils
Flexibility	D 522	conforms
Impact resistance	D 2794	160 + in. lbs.
Mildew resistance	D 3273, D 3274	10
Paintability	D 3359	5A
Scrub resistance	D 2486	1350 cycles
Surface burning characteristics	E 84
	flame spread	5
	smoke developed	0
Tensile properties	D 2370
	tensile strength	565 psi
	elongation	48.9%
	elongation at 100 psi	1.2%
VOC content	D 3960	conforms
	50% ethanol	conforms
	5% acetic acid	conforms
	5% sodium hydroxide	conforms
	5% hydrochloric acid	conforms
	5% citric acid	conforms
	corn oil	conforms
	2% phosphoric acid	conforms
	5% trisodium phosphate	conforms
	distilled water	conforms
Water vapor transmission (perms)	D 1653	0.28 grains/ft2/hr.
Weathering/aging	G 53
	Weathering 1000 Hrs.:
	chalking	8
	adhesion	5A
	flexibility	conforms
	tensile strength	695 psi
	elongation	-34.4%
	Aging 12 cycles:
	adhesion	5A
	flexibility	conforms
	tensile strength	635 psi
	elongation	-22.7%
	Aging 2 weeks at 40°C:
	adhesion	5A
	flexibility	conforms
	tensile strength	633 psi
	elongation	-5.5%